How to Measure for Curtains: From Pole or Track Width to Drop
Record the full pole or track width, hanging reference point and desired finish, then add details of obstructions and photos to help discuss curtain dimensions.
Published · About 5 min read · Published by iGift Company Limited(軒龍實業有限公司)
Decide on the plan before measuring
Take a tape measure and something to write with. First decide whether you will use an existing curtain pole or track, or plan to add one. Consider the area you want to cover, whether the curtains should open to one or both sides, and whether you want one or two layers.
An existing pole or track affects the reference point for measuring. If neither is in place, record the window-frame dimensions, proposed position and available space on each side, and label these as something other than actual pole or track measurements. Measure from a safe position and do not lean out of the window to take photos or measurements.
Measure the full width of the pole or track
If a pole or track is already in place, measure its full width rather than just the glass or window frame. Exclude the decorative finials at the ends of a pole; if the track overlaps, turns a corner or has separate sections, record these separately and explain the arrangement.
For example, if the pole itself is 180 cm wide, record it as “pole width 180 cm”; do not assume that it is the finished width of each curtain panel. Whether the curtain opens from one or both sides, its pleats and fabric allowance will affect the finished dimensions and need to be confirmed for the chosen design.
Measure from the hanging reference point to the sill or floor
First identify the hanging method, such as track hooks, curtain rings on a pole, or eyelets, and note where you start measuring. For a track, you can use the top of the track as a reference; for curtain rings, note the small hook eye at the bottom of a ring, and for eyelet curtains note the top of the pole.
Measure vertically from the chosen reference point to the sill or floor. State whether you want the curtain to finish above or below the sill, or close to the floor. You can measure on the left, in the middle and on the right and record any differences; confirm the desired clearance and heading height with the curtain maker rather than assuming a universal deduction.
Check projections and everyday movement
Look for a projecting sill, window handles, an air conditioner, sockets, furniture or the side of a bed. Record anything that may interfere with the way the curtain hangs or moves. Think about which way the window opens and whether there is room for the curtain when drawn back.
If you want both sheers and fabric curtains, note the space in the curtain box or on the wall so you can discuss whether it can accommodate two layers. If reducing light leakage matters, also share the space available at the sides and top, as this affects the possible coverage.
Share the measurements together with photos
Record the units and the start and end points for every measurement. Take a full photo of the window, plus photos of the pole or track and obstructions; add close-ups of corners or unusual features if needed. A simple sketch marking width and height can also help explain the space.
Window-frame, pole or track, and reference-point-to-floor measurements describe the site; they are not the finished curtain dimensions. The heading, pleats, opening arrangement and clearance still need to be confirmed. You can share the information with iGift Company Limited(軒龍實業有限公司)to discuss your needs and measuring approach.
- Record the full pole or track width, units, and whether the curtains open to one or both sides.
- Record the height reference point, the sill or floor measurements, and where you want the curtain to finish.
- Include photos and details of projections, and note whether you are considering one or two layers.
Curtain enquiry checklist
| Use | Describe the window or doorway and how the curtain will be used. |
|---|
| Dimensions | Share any known width and height measurements and relevant photos. |
|---|
| Style | Describe your preferred colours, light control and other requirements. |
|---|
Frequently asked questions
- Should I measure the window frame or the curtain track for width?
- If a pole or track is already in place, record the full width of the pole itself or the track, excluding decorative pole finials. If neither is installed, provide the window-frame dimensions and available space, and note that the pole or track position has yet to be decided.
- Are the pole width and height measurements the finished curtain dimensions?
- No, these are site measurements and should not be treated directly as the finished curtain width or length. The curtain maker still needs to confirm the dimensions based on the hanging method, pleats, opening arrangement and bottom clearance.
- What if the floor height differs across the window?
- Measure on the left, in the middle and on the right from the same hanging reference point to the floor, and label each reading. Explain where you want the curtain to finish and discuss how to handle the differences with the curtain maker.
Sources and further reading
Browse all guides